Home Windows Drivers Video Drivers xpvideoi. You can use the ” SetMClk ” option in your xorg. This chip is similar to the , but it also includes XRAM support and supports the higher dot clocks of the For this reason a mode that is as close to VESA like as possible should be selected. The server will then allow the mode to occupy the whole x LCD. For the chips either using the WinGine or basic architectures, the chips generates a number of fixed clocks internally.

Uploader: Shakashakar
Date Added: 22 June 2012
File Size: 37.43 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 73496
Price: Free* [*Free Regsitration Required]

This is usually due to a problem with the ” LcdCenter ” option. This may be related to a bug in one of the accelerated functions, or a problem with the BitBLT engine.

So for unexplained problems not addressed above, please try to alter the clock you are using slightly, say in steps of 0. The order of precedence is Display, Screen, Monitor, Device.

Also check the BIOS settings. In its current form, X can not take advantage of this second display channel. For CRT’s you can also try to tweak the mode timings; try increasing the second horizontal value somewhat.

For 24bpp on TFT screens, the server assumes that a 24bit bus is being used. Using these should give you all the capabilities you’ll need in the server to get a particular mode to work. You can avoid this by either using the ” NoStretch ” option or removing the HWcursor ” option.


Select type of offense: If you see such display corruption, and you have this warning, your choices are to reduce the refresh rate, colour depth or resolution, or increase the speed of the memory clock with the the ” SetMClk ” option described above. The total memory requirements in this mode of operation is therefore similar to a 24bpp mode. This also gives more memory bandwidth for use in the drawing operations.

Further to this some of the XAA acceleration requires that the display pitch is a multiple of 64 pixels. The ct supports dual-head display. That is from 0 to for 8bit depth, 0 to 32, for 15bit depth, etc.

This driver uses this capability to include a 16bpp framebuffer on top of an 8bpp framebuffer. XFree86 releases later than 4.

However it additionally has the ability for mixed 5V and 3. The reason for this is that the ttechnologies has used the panel timings to get a standard EGA mode to work on flat panel, and these same timings don’t work for an SVGA mode.

If it is a standard mode and frequency that your screen should be able to handle, try to find different timings for a similar mode and frequency combination. This can technologie in a reddish tint to 24bpp mode.

Chips and Technologies

It is believed that this is really just a with a higher maximum dot-clock of 80MHz. This support can be used to give a single display image on two screen tecnnologies different refresh rates, or entirely different images on the two displays.


This can be fixed by using the ” 18BitBus ” option. Integrates protection and reliability across your enterprise. Note that this option only has an effect on TFT screens.

This option sets the centering and stretching to the BIOS default values.

Chips and technologies f drivers – PDF

WW Memory bandwidth requirements exceeded by dual-channel WW mode. Many DSTN screens use frame acceleration to improve the performance of the screen. A basic architecture, the WinGine architecture which is a modification on this basic architecture and a completely new HiQV architecture.

Hence the tschnologies assumes a Sexually explicit or offensive language. If you believe this comment is offensive or violates the CNET’s Site Terms of Useyou can report it below this will not automatically remove the comment.

Gamma correction at all depths and DirectColor visuals for depths of 15 or greater with the HiQV series of chipsets. It often uses external DAC’s and programmable clock chips to supply additional functionally.