Terms and conditions apply. Lift and remove the adapter bracket. Press in on the tabs on each side of the drive and slide the drive up and out. If you are installing a new card, remove the filler bracket to create an empty card-slot opening. A new battery can explode if it is incorrectly installed. Disconnect the DC power cables from the system board and the drives. Removing the Interposer Board 1 interposer board 3.

Uploader: Mazule
Date Added: 5 November 2012
File Size: 59.81 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 19445
Price: Free* [*Free Regsitration Required]

Page 93 1 hinged lever 2 indented tab side view 2. Remove the filler bracket by raising the hinged lever and sliding the bracket up. To remove the power cables, use the cables as leverage and pull away from the clips while simultaneously pulling on the metal clips with your fingers. To add or replace the optipllex, gently press it down into the slot connector until it clicks into place. Facing the front of the computer, use your fingers to remove the front- panel cover.

Page 46 1 hard-drive cable 2 power cable 3.

Dell GX w/ AGP Slot | Dell Optiplex GX Motherboard w/ Agp

Connect the floppy-drive cable to the DSKT connector on the system board. Page 99 3 serial adapter cable 4 retention arm 5.


Small Desktop and Small Mini-Tower Computers Replace the badge by pressing it into place, ensuring that the two tabs click, securing it into position. Item is in your Cart. Open the computer cover slowly to prevent damage to the system motheerboard.

If you are installing an IDE drive, configure the drive for the cable-select setting. Page of Go. Page 60 Installing a Floppy Drive 1.

Dell OptiPlex GX260 Service Manual

Lift and remove the card bracket. Press the insert until it pops free of the front-panel cover. Page 44 1 interposer board 2 notch on inside of cover 3 interposer board tab If your computer came with an IDE CD drive, use the spare connector on the existing interface cable. Please make sure that you are posting in the form of a mothreboard.

UserBenchmark: Dell OptiPlex GX Compatible Builds

Replacing the Motherboqrd Cage 1 card cage 2 tabs 3 slots 6. Yes sorry I haven;t replied, the RAM with the higher frequency should clock down to the maximum supported frequency of your motherboard. Disconnect the DC power cables from the system board and the drives.


Remove the filler bracket. I need new ram for my Optiplex GX as well.

If you are replacing a card that is already installed in the computer, remove the card. Guys I’m going to bump this thread. Get fast, free shipping with Amazon Prime. Transfer components from the existing system board to the replacement system board. Remove the power cable from the interposer board. What is quad core mixed CPU speed? Amazon Second Chance Pass it on, trade it in, give it a second life.

Do not route card cables over or behind the cards. Match the colored strip on the cable with pin 1 on the drive pin 1 is marked as “1”. What is single core floating point speed? Press the inserts until they pop free of the front-panel cover. Before you perform this procedure, see Attach the serial adapter cable to the serial port connector on the system board labeled SER2.