Chapter 15 Press ‘1’or ‘2’ on the keypad on the Modem test menu to select relay test mode. E – Shutter drive motor or finisher controller PCB failure – Shutter open detection sensor failure – Shutter clutch failure – The shutter open sensor did not turn on when ms have lapsed since the shutter unit had performed open operation, resulting in incomplete open operation. Indicates an item intended to provide notes assisting the understanding of the topic in question. If ‘yes’ is selected, the serial No. F 2 When the pickup roller drive gear is engaged with the pickup roller shaft gear, drive power is transferred to the pickup roller shaft gear and consequently the pickup roller starts rotating.

Uploader: Dailabar
Date Added: 28 April 2015
File Size: 65.26 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 86626
Price: Free* [*Free Regsitration Required]

Be sure to pay attention to this when downloading, because the versions are not backward-compatible.

You can’t post conmments that contain an email address. The sheet-to-sheet bias is lower than that applied during printing and it is applied at the prescribed timing to prevent the toner remaining on the photosensitive drum from adhering to the transfer charging roller.

TH2 Fixing sub thermistor Detects ir20022 fixing heater temperature. If any operation error occurs after changing the setting value, change the setting value to the original one.

Install Canon ScanGear Tool

Go back to that site, but use this link It has been retried three times in vain. Also perform the following checks: The removed sanner reader mount is no longer necessary. Provides a description of a service mode.


Yes No 3 not used – – 4 not used – – Chapter 15 Bit Function 1 0 5 ir2202 used – – 6 not used – – 7 not used – – The machine must not be exposed to the rays of the sun. PI11 The Document set sensor has been held off since start of pickup.

E Use it to clear the management information at the time of card reader removal. scaner

The last digit ‘1’ shows that the license is active. Scangear finds it over IP and install succesfully.

How i do scanner in canon ir2022

Scan resolution dpi vertical scan scsnner dpi horizontal scan Color send: This item will be sent through the Global Shipping Programme and includes international tracking. Horizontal scan end scanmer correction superfine: Lately during the filling cycle water hammer is occurring. See your browser’s documentation for specific instructions. Symbol Description Indicates an item of a non-specific nature, possibly classified as Note, Caution, or Warning.

Press the User Mode key ” “, 2 key, 8 key, User Mode key ” ” on the operation panel of the host machine.

imageRUNNER – Support – Download drivers, software and manuals – Canon UK

If possible, schedule the replacement so that it coincides with a scheduled service visit. Satisfies all the conditions of the standard image quality and paper feed performance.

I had to search for something because Adobe Photoshop at least CS5 will not see or use the Canon copier even after setup with ScanGear. Press numeric keypad keys 1, 3 and 4 during the CCD test to carry out the individual tests described below. Place a document on the document platen and press the start key to transfer the document at the speed matched to the scan resolution setting.


SOLVED: How i do scanner in canon ir – Fixya

Posted by Abhijit January 24, Document length sensor 2 PI5: Operation procedures 1 Go into the service mode and indicate the below mentioned service mode. J Supplies power 5 VC, 3. When the solenoid is turned scannre, the control arm pushes the cam to rotate the pickup roller drive gear slightly.

Low temperature detection during temperature control Scanneg temperature control, the main or sub thermistor has detected low temperatures continuously for or more msec after the target temperature was reached.

If ‘yes’ is selected, the serial No. When a duplex unit is installed, remove it before pulling out the hinge shaft for each access. Cleaning the Fixing Pressure Roller If white streaks are seen on the printed paper, the fixing pressure roller can scanenr dirty.