Select a minimum of two disks in this column. These messages may appear during the boot process:. Press Enter to execute the function associated to the field. Two settings are available: The metadata stored on the disk drives contains sufficient information to restore and reactivate the RAID volumes in case the NVRAM is lost for example, when the motherboard is replaced. There are several ways to physically locate a disk drive, as long as the firmware is correctly configured and the drives support disk location. Sets cursor context to the menu selection area.
|Date Added:||20 December 2007|
|File Size:||39.14 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Synchronizing an array means that the firmware synchronizes the data on the secondary disk s with the data on the primary disk of the mirror. An error message appears if the disks in the activated array are larger than the hot-spare disk or if the disks in fusuon activated array are not the same type as the hot-spare disk SATA versus SAS.
Hook interrupt default Bypass interrupt hooks. Follow these steps to view the properties of RAID volumes. From the Adapter List, press the Esc key to exit. Use the arrow keys to select the desired adapter and press Enter to add it to the end of the Boot Adapter List. Indicates whether mpf allow the use of queue tags for a device. Link error count threshold values. Copies the data from the primary copy of the mirrored array to the secondary copy. Indicates whether to allow a device to disconnect during SCSI operations.
Saving the configuration creates the array. Provides the current main area menu, if applicable. Some OS drivers do not support this setting. This message appears when fewer than four adapters are in the boot order and more adapters exist than are shown.
Use that menu to select the device and rearrange the order. It has a striped layout.
the Drivers Database – Free Drivers and Support
Select the item in which the cursor is positioned. Bus value has range 0x00 – 0xFF, 0 – decimal. To display minimum information, specify Terse mode.
The status of the array. The default value is 2 scis, with options between 1 and 10 seconds. Sets the default value for synchronous and wide negotiations with specified devices.
Disk is not responding. These codes indicate the reason why the Configuration utility has disabled the selection of some disks. The Adapter Properties screen shown below allows you to view and modify adapter settings.
The devices at the ends of the SCSI bus must terminate the bus. Yes, No, All, nonE, Cancel.
Appears when an adapter is removed from the system or relocated behind a PCI bridge. Select a minimum of two disks in this column. However, if removed, the disk drives must first be labelled to make sure that they are placed back in the same disk bays lxi which they were removed when reinstalled. Up, down, left, right movement to position the cursor. Caution – Possible data loss: When the Device Verify screen shown below appears, press Enter to begin the verify process.
Select your language
The user is asked to confirm, if changes have been made. This option is only applicable to devices attached to adapter number zero in the boot list on non-BBS systems.
The Adapter Properties menu allows you to view and modify adapter settings. Striped arrays do not support hotspares, so no modifications can be made to an array after it is created.