Motherboard Installation Install Other Devices Install and connect any other devices in the system following the steps below. Make sure the pin assignment will match before plugging in. The socket latches are levered upwards and latch on to the edges of the DIMM. If you have two devices on the cable, one must be Master and one must be Slave. You must use an ATX power supply in order to use this feature. Click the software you want to install. Hardware specifications and software items are subject to change without notification.

Uploader: Kajiktilar
Date Added: 2 September 2016
File Size: 70.58 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 25310
Price: Free* [*Free Regsitration Required]

It is highly recommended that users enter this option to load optimal values for accessing the best performance. An Auto Setup screen automatically pops out, and then you can go on the auto-installing or manual installation depending on your operating system.

Load Setup Defaults Quick Boot If you enable this item, the system starts up more quickly be elimination some of the power on test routines.

If you press Y, and then Enter, the Setup Utility loads a set of bestperformance default values. Press F7 to install the setup utility with a set of high-performance values.

PCCHIPS M789CG, Socket 370, Intel (M789CG (V3.0)) Motherboard

Find out your mainboard model name and click on it to obtain its correct driver directory. Plug the bracket cable onto the USB1 header.

Try Other Boot Device If you enable this item, the system will also search for other boot devices if it fails to find an operating system from the first two locations. Power Management Use this item to select a power management scheme. To configure an IDE hard disk drive, choose Auto.


Further, the manufacturer reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any moedrrbord of such revision or changes. Self-Monitoring, Analysis and Reporting Technology feature. Refer to the following to install the memory module. It’s a community-based project which helps to repair anything.

Do not touch those components unless it is absolutely necessary. The other options on the main menu page lead to dialog boxes requiring your answer Yes or No by hitting the Y or N keys. Press Enter to select the highlighted option. The information in this document is subject to change without notice. I Moederbodr Electricity Precautions You can install this motherboard in an ATX case. Install the DIMM module into the socket and press it firmly down until it is seated correctly. If the Auto setting fails to find a hard disk drive, set it to User, and then fill in the hard disk characteristics Size, Cyls, etc.

These default values are quite demanding and your system might not function properly if you are using slower memory chips or other low-performance components. Install the edge connector of the expansion card into the slot.


PCCHIPS MCG VA, Socket , Intel (MCG(VA)) Motherboard | eBay

If you have already changed the setup utility, press F10 to save those changes and exit the utility. Moeferbord enabled, separate memory banks are set for odd and even addresses, and upcoming byte of memory is accessible while refreshing the current byte.

Ensure the edge connector is correctly seated in the slot. Never connect power to the system during installation; otherwise, it may damage the mainboard.

moederhord Hardware specifications and software items are subject to change without notification. Disable this item unless you are using an old KB drive. If it happens, you can use the clear CMOS jumper to clear the CMOS memory which has stored the configuration information; or you can hold down the Moederobrd Up key while rebooting your computer.

Load Setup Defaults 30 Chapter 3: Clock Spread Spectrum This item enables the clock to generate spread spectrum. It shows the bundled software that this mainboard supports. Parallel Port Mode Use this item to set the parallel port mode. You can use a card reader to read or transfer files and digital images to your computer.

Segue una lista con i chipset e le rispettive funzioni: